|
Foredom 1070 Micro Motor Kit, Rotary For high speed applications up to 38,000 rpm including light deburring of cast pieces, bright cutting in jewelry making and fine detailing in wood. Kit includes control box, handpiece with 3/32" collet,
variable speed foot control, handpiece cradle, spare pair of motor brushes,
spare fuse and collet changing wrenches.
Compared to flex shafts, micro motors have much less
torque, however, the higher speed results in a comparable rate of material
removal with a lighter touch. The simple cord connection between the handpiece
motor and control box is another key advantage. Unlike the "drag" and general
restriction in maneuverability you have with a shaft and sheath, micro motors
offer much greater freedom of movement.
The NEW 1070 Kit includes:
- HP4-917 Control Box
- MH-170 Handpiece with 3/32" (2.35mm) Collet
- HP4-960 Variable Speed Foot Control
- HP4-933 Handpiece Cradle
- Spare pair of motor brushes, spare fuse, collet
changing wrenches.
The HP4-917 Control Box is compact
with switches on the front for On/Off Power, Forward or Reverse Rotation, and
Manual or Foot Speed Control. Speed can be adjusted from low to full speed using
the dial on the box or with the foot pedal. An Overload Protector Light is also
featured that turns red and sounds a beeping alarm when the motor stalls.
The back of the control box has a convenient voltage
selector switch for operating with either 115 volt or 230 volt. The control
converts AC current to DC cuurrent required for the handpiece.
The MH-170 High Speed Rotary Handpiece
has a slender, contoured grip for precise and very high speed work and quick
release rotary type chuck. It has a fan cooled, brush-type continuous duty motor
that runs cool and vibration free with permanently lubricated, shielded ball
bearings that require no lubrication. It comes with a 3/32" (2.35mm) collet that
is easy to install and change with supplied collet changing wrench. Optional
HP4-117B 1/8 inch collet and
HP4-117C 3mm collet are available separately. Bur changes are quick and easy
with a simple twist of the front section of the Handpiece. A cradle is also
supplied for the handpiece when not in use. A selection of collet adapters is
available for simplifying changes between accessories with different shank
sizes.
Handpiece specifications: 6.2" overall length, 5/8"
grip diameter, 1" motor diameter, 7.3 oz./208 gr., DC30V/1.2A. CE marked.
An optional On/Off Foot Switch
(HP4-927) is also available separately to turn the motor on and off without
changing the speed set by the dial.
Save Over 20% Off the Retail
Price!
Suggested Retail Price: $399.00
MHC Price: Only $318.95
|
|
|
Sign In
