Proxxon MICROMOT AC Adapter NG 5/E with Rotary Tool MICROMOT 50. An affordable rotary tool with the same quality and performance that you can trust from Proxxon. The Proxxon Rotary Tool MICROMOT 50 handpiece has only an On/Off swich, and has been paired with the NG 5/E adapter with speed controls built into the work station. Reade below for more...

Proxxon MICROMOT AC Adapter NG 5/E with Rotary Tool MICROMOT 50
 

NG 5/E AC Adapter SPECIFICATIONS:
This workstation with electronic speed control comes in a compact NORYL casing (the material is heat resistant, recommended for transformers) and has a capacity of 5.0A at 16V no load and 12 Volt under load = 60 VA (DC). Primary supply at 110-120V. The thyristor electronic control (with feedback) allows for optimum tool speed and high torque at low speeds.

The workstation offers three polarized sockets for MICROMOT machines, so that three different tools can be plugged in at a time. In addition the unit features one pair of sockets for standard banana plugs with 5/32" diameter (4 mm diameter). It provides a master switch for turning off the transformer without needing to unplug. The red LED indicates "ready". A PTC (positive temperature coefficient) element guarantees protection against overload, the plugged in machine will not restart automatically. After cooling down, the AC wall plug should briefly be unplugged to reset the adapter. The whole unit comes in a very compact and practical design with storage holes for insert bits and cutters with shafts of 3/32" and 7/64" (2.35 and 3 mm). The foldable tool rest keeps the MICROMOT tool being used standing by safely.

Rotary Tool MICROMOT 50 SPECIFICATIONS:

Tried and tested on 1001 uses: milling, drilling, routing, de-scaling, polishing, cutting, cleaning, sawing, engraving, etc. This is due to a number of factors:

The diameter of only 1 3/8" makes the tool very easy to handle. Its weight of 1.2 lb (230 g), its quietness and effortless, vibration-free drive via the special permanent magnet motor, the ground spindle and collar bearing all contribute to the ergonomic design. An efficient cooling system facilitates extended use under various load conditions.
The high quality, triple-slit steel collets ensure accurate clamping of the cutters and a very high concentricity. The size of the machine dictates a 12 V drive system, use of a transformer is thus required. Proxxon recommends MICROMOT transformers of at least 1.0 A, such as the NG 5/E included here.  Since this handpiece includes ONLY an ON/OFF switch, the NG 5/E adapter is ideal.  The NG 5/E adapter includes an adjustable control on the work station allowing you to operate the handpiece at speeds betweeen 5,000 and 20,000 rpm.

No load speed is 20,000 rpm.  A specially balanced motor makes this tool run very smoothly at variable speeds from 5,000 - 20,000 rpm (no load). It comes with 6 high precision triple slit steel collets in sizes 1/32", 1/16", 5/64", 3/32", 7/64" and 1/8" (1,0 - 1,5 - 2,0 - 2,4 - 3,0 and 3,2 mm) which ensure accurate clamping of the bits for highest concentricity and the precision you need for finest work pieces. Weight: 1.2 lb (230 g), length: 8 21/32" (220 mm). Low voltage for optimal safety, 12 V DC, max 40 W input. As power supply source we recommend MICROMOT transformers of at least 1.0 A.
 

This item is compatible with the Proxxon Footswitch. For added control, consider purchasing the Proxxon Switch/Footpedal.

For added versatility and maneuverability, consider adding the Proxxon MICROMOT Flexishaft 110/P.

Manufacturer:   Proxxon