Proxxon MICROMOT AC Adapter NG S/2 with Rotary Tool MICROMOT 50/E (Built-in Speed Control) NG S/2 AC Adapter SPECIFICATIONS: Very compact design. NORYL casing (heat resistant - a necessity for transformer enclosures). Capacity 2.0A at 16 Volt open circuit - and 12 Volt under load = 24VA (DC). Primary supply 110-120V. Polarized socket for MICROMOT plug. Red LED indicates readiness for use. PTC (Positive temperature coefficient) element prevents overload, the plugged in tool will not automatically restart. After cooling down, the AC wall plug should be disconnected briefly to reset the adapter. Modern design with holes for storing bits. Foldable tool rest provides a secure place for keeping the MICROMOT tool ready for use. Rotary Tool MICROMOT 50 SPECIFICATIONS: Tried and tested on 1001 uses: milling, drilling, routing, de-scaling, polishing, cutting, cleaning, sawing, engraving, etc. This is due to a number of factors: The diameter of only 1 3/8" makes the tool very easy to handle. Its weight of 1.2 lb (230 g), its quietness and effortless, vibration-free drive via the special permanent magnet motor, the ground spindle and collar bearing all contribute to the ergonomic design. An efficient cooling system facilitates extended use under various load conditions. The high quality, triple-slit steel collets ensure accurate clamping of the cutters and a very high concentricity. The size of the machine dictates a 12 V drive system, use of a transformer is thus required. Proxxon recommends MICROMOT transformers of at least 1.0 A, such as the NG S/2 included here. The simple NG S/2 is suffiencient for this rotary tool, since the 50/E handpiece has its own built in speed control. No load speed is 20,000 rpm. A specially balanced motor makes this tool run very smoothly at variable speeds from 5,000 - 20,000 rpm (no load). It comes with 6 high precision triple slit steel collets in sizes 1/32", 1/16", 5/64", 3/32", 7/64" and 1/8" (1,0 - 1,5 - 2,0 - 2,4 - 3,0 and 3,2 mm) which ensure accurate clamping of the bits for highest concentricity and the precision you need for finest work pieces. Weight: 1.2 lb (230 g), length: 8 21/32" (220 mm). Low voltage for optimal safety, 12 V DC, max 40 W input. As power supply source we recommend MICROMOT transformers of at least 1.0 A. (Bur accessories pictured are not included)

This item is compatible with the Proxxon Footswitch. For added control, consider purchasing the Proxxon Switch/Footpedal.

For added versatility and maneuverability, consider adding the Proxxon MICROMOT Flexishaft 110/P.

Manufacturer:   Proxxon