Bedan Turning Tool 3/8 inch (10mm) x 10 inch (200mm) by Robert Larson. This parting tool quickly makes accurate and repetitive sizing cuts on spindles. It’s outstanding when making bead cuts of smoothing small diameter spindles. The tool’s sides slope inward to reduce potential biding.

Robert Larson turning tools are manufactured to the highest quality.

About these quality tools:

The Blades: The most important issue in a well designed turning tool is the quality of the blade. All Robert Larson blades are manufactured to precise specifications. The steel is M2 molybdenum based high speed steel which is machined from the solid in most cases. A few tools are entirely forged into shape. Next the tool is heat treated, being hardened and tempered to sixty-two degrees on the Rockwell "C" scale. By no means is this the end of the manufacturing process, as the blades are next machine ground as well. The cutting edge is carefully ground, with this being followed by hand glazing and polishing of the tool surface. Polishing is linear to the blade length, unlike other manufacturers that leave circular polishing markings on the blade. In the case of fluted tools, polishing is accomplished with specially shaped abrasive impregnated rubber wheels. A thorough quality inspection is made on each and every tool before it is proudly marked HSS Steel (High Speed Steel). Made in Sheffield England.

The Handles: While the blades may be the most important part of a woodturning tool, the handle can make a tremendous difference in the accuracy of your turning as well as how long you can turn before getting tired. Robert Larson turning tool handles were designed in consultation with a leading woodturning company (established over a century ago) to provide both a firm as well as comfortable grip that will let you do your best work for hours on end! The handle starts with a blank of quality ash wood which is shaped into a unique style with beaded grips. While other manufacturers will apply a lacquer finish to the handle, our handles have an oil finish which provides a firmer grip. A solid brass sleeve is mounted on the front of the handle to strengthen the fitting of the blade tank into the handle. Each tool has been given the best size handle for the job.

Manufacturer:   Robert Larson